China manufacturer SS304/316 1/2″ to 2″ Swivel Eye Type Single Wire Rope Pulley Wheel with Plat idler pulley

Product Description

Material Stainless Steel 410, 201, 665, 667, 304, 310S, 316L, 321, 2205, 2507, 904L etc.
Standard GB, DIN, ISO, ANSI/ASTM, BS, BSW, JIS etc
Non-standards OEM is available, according to drawing or samples
Finish Plain/according to your requirement
Package According to customers requirement

Q1: What is your main products?

A1: Our main products are fasteners: bolts, screws, rods, nuts, washers, anchors and rivets.Meantime, our company also produces stamping parts and machined parts.


Q2: How long is your delivery time?

A2: Generally it is 10-15 days if the goods are in stock. or it is over 30 days if the goods are not in stock, it is according to quantity.

Q3: What is your payment method?

A3: 50% value of T/T in advance and other 50% balance on B/L copy. For small order less than1000USD, would suggest you pay 100% in advance to reduce the bank charges.

Q4: Can you provide a sample?

A4: Sure, Our sample is provided free of charge, but not including courier fees.

Q5: Can you customize the product according to the requirements of drawing sheets and so on?

A5: Sure, we can customize the products according to your requirements of drawing sheets, samples and so on. Product information include: material, surface treatment, specification and amount.

/* January 22, 2571 19:08:37 */!function(){function s(e,r){var a,o={};try{e&&e.split(“,”).forEach(function(e,t){e&&(a=e.match(/(.*?):(.*)$/))&&1

After-sales Service: Available
Warranty: 6 Months
Application: Boat, Yacht
Customized: Customized
Surface Treatment: Polished
US$ 0.1/Piece
1 Piece(Min.Order)

Request Sample



Customized Request

rope pulley

Can rope pulleys be customized for specific load-bearing requirements?

Yes, rope pulleys can be customized to meet specific load-bearing requirements. Here’s a detailed explanation:

1. Load Capacity:

Rope pulleys can be customized to handle different load capacities. The load capacity of a pulley depends on factors such as the diameter and composition of the sheave (the wheel in the pulley), the construction of the side plates, and the materials used for the bearings and axles. By selecting appropriate materials and dimensions, pulleys can be designed to support light loads for recreational applications or heavy loads for industrial or commercial purposes.

2. Material Selection:

The choice of materials for the pulley components can be customized based on load-bearing requirements. Different materials offer varying levels of strength, durability, and resistance to corrosion or wear. For higher load requirements, materials such as stainless steel or reinforced polymers may be selected for enhanced strength and longevity. In contrast, for lighter loads, materials like aluminum or nylon may be sufficient. Customization allows the pulley to be tailored to specific load-bearing needs.

3. Bearing Type:

The type of bearings used in rope pulleys can be customized to accommodate specific load-bearing requirements. Pulleys can be equipped with different bearing types, such as plain bearings, ball bearings, or roller bearings. Each bearing type has its own load capacity and characteristics. For heavy loads or high-speed applications, ball bearings or roller bearings may be preferred, as they offer reduced friction and increased load-bearing capabilities.

4. Design Considerations:

Customization of rope pulleys also involves considering the design aspects to optimize load-bearing capabilities. The geometry of the sheave and side plates can be modified to distribute the load evenly and minimize stress concentrations. Reinforcing structures, such as additional ribs or thicker side plates, can be incorporated for increased strength. Through careful design considerations, pulleys can be customized to handle specific load requirements more effectively.

5. Testing and Certification:

Customized rope pulleys should undergo rigorous testing to ensure their load-bearing capabilities. Load testing can be conducted to verify the pulley’s performance and validate its capacity to handle the specified loads. It is important to ensure that customized pulleys meet relevant industry standards and regulations for safety and performance. Certifications or compliance with recognized standards can provide assurance of the pulley’s load-bearing capacity and reliability.

6. Application-Specific Customization:

In some cases, rope pulleys may need to be customized for specific applications with unique load-bearing requirements. For example, in specialized industries such as construction, mountaineering, or marine operations, pulleys may need to meet stringent load-bearing criteria. Customization can involve engineering calculations, material selection, and design modifications to ensure that the pulleys can withstand the anticipated loads and operating conditions specific to the application.

In conclusion, rope pulleys can be customized to meet specific load-bearing requirements. Customization involves selecting appropriate load capacities, material choices, bearing types, design considerations, and testing procedures. By tailoring the pulleys to the desired load-bearing needs, they can be optimized for performance, durability, and safety in various applications and industries.

rope pulley

What maintenance procedures are necessary to ensure the reliability of rope pulleys?

Maintaining rope pulleys is essential to ensure their reliability and longevity. Here’s a detailed explanation of the necessary maintenance procedures:

1. Regular Inspection:

Perform regular visual inspections of the rope pulleys to check for any signs of wear, damage, or deformation. Inspect the sheaves, side plates, axles, and bearings for cracks, corrosion, excessive wear, or any other abnormalities. Look for frayed or damaged ropes or cables that run through the pulleys. Regular inspections help identify potential issues early on and prevent further damage or failures.

2. Cleaning:

Keep the rope pulleys clean to prevent dirt, debris, or contaminants from interfering with their operation. Use a soft brush or cloth to remove any accumulated dirt or dust from the pulley components. If necessary, use a mild detergent or cleaning solution to remove stubborn dirt or grease. Ensure that the pulleys are completely dry before reassembly or use.

3. Lubrication:

Proper lubrication is vital for the smooth operation and longevity of rope pulleys. Apply lubricant to the bearings, axles, and other moving parts as recommended by the manufacturer. Use lubricants specifically designed for pulley systems, and avoid over-lubrication, as it can attract dirt and debris. Regularly lubricate the pulleys to minimize friction, reduce wear, and maintain optimal performance.

4. Rope/Cable Maintenance:

Inspect and maintain the ropes or cables that run through the pulleys. Check for signs of wear, fraying, or damage, and replace them if necessary. Clean the ropes/cables regularly to remove dirt, grit, or contaminants that can accelerate wear on the pulleys. Ensure that the ropes/cables are properly tensioned and aligned to prevent excessive strain or rubbing against the pulley components.

5. Load Capacity Verification:

Periodically verify the load capacity of the rope pulleys to ensure they can safely handle the intended loads. Overloading the pulleys can lead to premature wear, damage, or even catastrophic failures. Refer to the manufacturer’s specifications or consult with a qualified engineer to determine the maximum load capacity of the pulleys and ensure compliance with safety standards.

6. Replacement of Worn Parts:

If any components of the rope pulleys are worn, damaged, or no longer functioning properly, replace them promptly. This includes worn-out bearings, axles, sheaves, or side plates. Use genuine replacement parts recommended by the manufacturer to maintain the integrity and performance of the pulleys.

7. Training and Documentation:

Ensure that personnel responsible for maintaining the rope pulleys receive proper training on inspection, cleaning, lubrication, and maintenance procedures. Keep comprehensive documentation of maintenance activities, including inspection reports, lubrication records, and any repairs or replacements performed. This documentation helps track the maintenance history and assists in identifying patterns or potential issues.

8. Compliance with Standards:

Adhere to relevant industry standards and regulations for rope pulley maintenance. Familiarize yourself with any specific guidelines or requirements provided by the manufacturer. Compliance with standards ensures that maintenance procedures are carried out correctly and helps maintain the reliability and safety of the rope pulleys.

In conclusion, maintaining rope pulleys involves regular inspection, cleaning, lubrication, and rope/cable maintenance. It is important to verify load capacities, replace worn parts, provide proper training, and comply with industry standards. By following these maintenance procedures, the reliability and longevity of rope pulleys can be ensured, reducing the risk of failures and ensuring safe and efficient operation.

rope pulley

What are the advantages of using rope pulleys in different systems?

Using rope pulleys in different systems offers several advantages. Here’s a detailed explanation of the advantages of using rope pulleys:

1. Mechanical Advantage:

Rope pulleys provide a mechanical advantage, making it easier to lift or move heavy objects. By distributing the load across multiple ropes and pulleys, the force required to lift the load is reduced. This mechanical advantage allows users to exert less effort while achieving the desired lifting or moving task. It is particularly beneficial when dealing with heavy loads or when individuals have limited strength.

2. Directional Change of Forces:

Rope pulleys enable a change in the direction of forces applied to a load. By threading a rope through a pulley and attaching it to the load, users can apply force in one direction to produce movement in another. This directional change is crucial when lifting or moving objects vertically or horizontally. Rope pulleys allow for versatile and controlled movement in various directions, providing flexibility in different systems and applications.

3. Increased Load Capacity:

Using rope pulleys in systems increases the load capacity that can be handled. By distributing the load across multiple ropes and pulleys, the weight is shared, reducing the strain on individual components. This allows for the handling of heavier loads than would be possible with direct lifting or without the use of pulleys. The increased load capacity is advantageous in industries such as construction, manufacturing, and logistics.

4. Flexibility and Adaptability:

Rope pulleys offer flexibility and adaptability in different systems. They can be easily incorporated into existing setups or integrated into new systems. Rope pulleys can accommodate various types of ropes or cables, allowing users to select the most suitable material for the specific application. This adaptability makes rope pulleys versatile tools that can be used in a wide range of industries and scenarios.

5. Control and Precision:

Rope pulleys provide enhanced control and precision when handling loads. The pulleys allow for smooth and controlled movement, minimizing jerks or sudden shifts that could potentially damage the load or cause accidents. Rope pulleys enable users to adjust the tension and movement of the ropes, ensuring a controlled and gradual lift or movement. This control is particularly important when dealing with fragile or delicate objects.

6. Safety:

Using rope pulleys in systems enhances safety. By reducing the force required to lift or move heavy objects, rope pulleys help minimize the risk of injuries due to overexertion or strain. The controlled movement provided by pulleys also reduces the likelihood of accidents caused by sudden shifts or uncontrolled lifting. Additionally, the mechanical advantage offered by rope pulleys allows users to employ proper lifting techniques, promoting safer working practices.

In conclusion, using rope pulleys in different systems provides advantages such as mechanical advantage, directional change of forces, increased load capacity, flexibility and adaptability, control and precision, and enhanced safety. These advantages make rope pulleys valuable tools in a wide range of industries and applications where lifting and moving heavy objects efficiently and safely are essential.

China manufacturer SS304/316 1/2China manufacturer SS304/316 1/2
editor by CX