China manufacturer Luoyang Citic IC Single-Rope Mine Drum Hoister Elevator Sheave Pulley pulley puller

Product Description

HangZhou Citic IC Single-Rope Mine Drum Hoister Elevator Sheave Pulley

Product Description

 Xihu (West Lake) Dis. wheel device can transport the whole under the premise of swimming round and fixed wheel adopts integral cast joint structure, wheel hub, wheel rim for cast steel materials, spoke for the channel steel, after welding the whole annealing process again. 

Considering the replacement bearing maintenance convenient, leave replace bearing remove space, guide wheel device structure adopted eccentric layout. 

Xihu (West Lake) Dis. shaft using middle carbon alloy steel forging whole, adopting the structure of the cast joint pulley, equipped with PVC or nylon liner, protect the wire rope. 

Imported or domestic spherical roller bearings, also can install bearing temperature measuring element. 

In order to prolong the service life of wire rope, rim inside wedge liner with wear-resisting, withstand voltage, using D660 (1571) or nylon liner. 

1) eccentric layout: on 1 side of a winding wheel have replaced bearing dismantling space, can not remove the pulley mechanism, only for bearing maintenance and replacement. 
2) symmetry layout: relative with 4 wheels on both sides of the 2 bearing seat is symmetrical, but need to replace the bearing shell, only to remove the pulley mechanism. 
 
sheave pulley and the common malfunction and technical guide wheel 

1) to the problem of old structure pulley sliding bearing to burn tile should improve lubrication way; Because of the pulley is installed on the daily maintenance inconvenience, should add temperature alarm device, so as to timely maintenance to prevent the tile burning failure, or the original sliding bearing replacement into rolling bearing structure 

2) for old structure pulley rope groove without liner, can no longer add padding on the original rope groove, need to change a gasketed pulley, adjacent assembly size can remain motionless, and installation 

3) for mountain transportation difficulties or have some difficulties in roadway transportation in underground mine, the pulley is (guide wheel) change the structure into 2 or 4 and a half of head sheave.

Company Profile

 

FAQ
 
Q: Why we believe in HangZhou CHINAMFG industries co., ltd:
A: 1. More than 30 years experience.
     2.We are the leading professional supplier of mining machinery, construction machinery, machines casting and forged parts.
     3. All products achieved ISO9901:2000 quality management certificate and CE, ROHS certificates.
 
Q:Delivery time?
A: Parts lead time 1-2months, machines 2-3months.
 
Q:Payment terms?
A: Accept payment type: T/T, L/C, Western union,Cash.
30% deposit when signed contract. Full payment paid before shipping
 
Q: Quality warranty?
A: Guarantee time: 1 year for main machinery. If something wrong we will provide the technical advice and find solution immediately. For those wearing parts we guarantee high quality parts for long-term supply.
 
Q: After sales service?
A: We can supply technical guide for machines running test and parts maintenance if end user needs.
 

Aftersales service 
ZTIC Heavy Industries is your business partner in the After Market.
ZTIC  able to provide:
1.    ENGINEERED SPARES –  DESIGN AND MANUFACTURING
2.    LARGE VOLUME STEEL AND IRON CASTING FOUNDARIES
3.    HUGE MACHINE SHOP CAPABILITIES
4.    TRAINING PROGRAMMES
5.    PREVENTATIVE MAINTENANCE PROGRAMS
6.    PREVETATIVE MAINTENANCE SERVICES
7.    COMPREHENSIVE MAINTENANCE PROGRAMS
ZTIC’s Field Service Engineers are trained specifically in the CITIC brand group products but are capable of undertaking the servicing of other OEM brands.
Our technicians are equipped with the most advanced technological diagnostic equipment available to trouble shoot your equipment to optimise performance and minimise down time.
ZTIC also has an extensive capability in supplying all you consumable and electrical/ mechanical spare part needs.

 

After-sales Service: Online Support
Warranty: 1 Year
Type: Single-Rope Mine Hoister
Driven Type: AC
Speed: Single-Rope Mine Hoister
Carrying Capacity: Single-Rope Mine Hoister
Customization:
Available

|

Customized Request

rope pulley

How does the pulley’s groove shape impact its performance with ropes?

The shape of a pulley’s groove significantly impacts its performance with ropes. Here’s a detailed explanation of how the pulley’s groove shape affects its interaction with ropes:

1. Rope Alignment:

The groove shape of a pulley determines how the rope aligns within it. A properly aligned rope ensures efficient transfer of force and minimizes wear and friction. The groove shape must match the diameter and flexibility of the rope to maintain proper alignment. If the groove is too narrow or shallow, the rope may not sit securely, leading to slippage or reduced performance. On the other hand, if the groove is too deep or wide, the rope may not make proper contact, resulting in inefficient force transmission.

2. Friction and Wear:

The groove shape of a pulley affects the friction and wear between the rope and the pulley. A well-designed groove shape reduces excessive friction, which can cause heat buildup and premature wear on the rope. The groove should have a smooth surface and the right curvature to allow the rope to move freely without unnecessary resistance. Additionally, the groove shape should prevent sharp bends or edges that could damage the rope fibers. Proper groove design helps prolong the lifespan of the rope and ensures optimal performance.

3. Bending Radius:

The groove shape of a pulley determines the bending radius that the rope experiences as it wraps around the pulley. A larger bending radius reduces stress and fatigue on the rope fibers, minimizing the risk of premature failure. The groove shape should provide a smooth and gradual curvature that allows the rope to bend without excessive strain. If the groove has a tight or abrupt curvature, it can cause excessive bending stress, leading to weakened rope integrity and potential breakage.

4. Load Distribution:

The groove shape of a pulley affects how the load is distributed across the rope. An optimized groove shape ensures even distribution of the load, preventing concentrated stress points that could weaken the rope. The groove should have a design that supports the rope evenly along its length and minimizes localized pressure. This balanced load distribution helps maintain the integrity and strength of the rope, allowing it to handle the expected load capacity effectively.

5. Rope Compatibility:

The groove shape of a pulley should be compatible with the type and diameter of the rope being used. Different ropes have varying characteristics, such as flexibility, diameter, and construction. The groove shape should be designed to accommodate the specific rope type to ensure proper fit and performance. Using a pulley with an incompatible groove shape can lead to reduced efficiency, increased wear, and potential damage to the rope.

In conclusion, the groove shape of a pulley plays a crucial role in its performance with ropes. The groove shape impacts rope alignment, friction and wear, bending radius, load distribution, and rope compatibility. A well-designed groove shape ensures efficient force transmission, minimizes wear on the rope, reduces stress and fatigue, evenly distributes the load, and maintains compatibility with the specific rope type. Proper consideration of the groove shape is essential for optimizing the performance and longevity of the pulley-ropes system.

rope pulley

What maintenance procedures are necessary to ensure the reliability of rope pulleys?

Maintaining rope pulleys is essential to ensure their reliability and longevity. Here’s a detailed explanation of the necessary maintenance procedures:

1. Regular Inspection:

Perform regular visual inspections of the rope pulleys to check for any signs of wear, damage, or deformation. Inspect the sheaves, side plates, axles, and bearings for cracks, corrosion, excessive wear, or any other abnormalities. Look for frayed or damaged ropes or cables that run through the pulleys. Regular inspections help identify potential issues early on and prevent further damage or failures.

2. Cleaning:

Keep the rope pulleys clean to prevent dirt, debris, or contaminants from interfering with their operation. Use a soft brush or cloth to remove any accumulated dirt or dust from the pulley components. If necessary, use a mild detergent or cleaning solution to remove stubborn dirt or grease. Ensure that the pulleys are completely dry before reassembly or use.

3. Lubrication:

Proper lubrication is vital for the smooth operation and longevity of rope pulleys. Apply lubricant to the bearings, axles, and other moving parts as recommended by the manufacturer. Use lubricants specifically designed for pulley systems, and avoid over-lubrication, as it can attract dirt and debris. Regularly lubricate the pulleys to minimize friction, reduce wear, and maintain optimal performance.

4. Rope/Cable Maintenance:

Inspect and maintain the ropes or cables that run through the pulleys. Check for signs of wear, fraying, or damage, and replace them if necessary. Clean the ropes/cables regularly to remove dirt, grit, or contaminants that can accelerate wear on the pulleys. Ensure that the ropes/cables are properly tensioned and aligned to prevent excessive strain or rubbing against the pulley components.

5. Load Capacity Verification:

Periodically verify the load capacity of the rope pulleys to ensure they can safely handle the intended loads. Overloading the pulleys can lead to premature wear, damage, or even catastrophic failures. Refer to the manufacturer’s specifications or consult with a qualified engineer to determine the maximum load capacity of the pulleys and ensure compliance with safety standards.

6. Replacement of Worn Parts:

If any components of the rope pulleys are worn, damaged, or no longer functioning properly, replace them promptly. This includes worn-out bearings, axles, sheaves, or side plates. Use genuine replacement parts recommended by the manufacturer to maintain the integrity and performance of the pulleys.

7. Training and Documentation:

Ensure that personnel responsible for maintaining the rope pulleys receive proper training on inspection, cleaning, lubrication, and maintenance procedures. Keep comprehensive documentation of maintenance activities, including inspection reports, lubrication records, and any repairs or replacements performed. This documentation helps track the maintenance history and assists in identifying patterns or potential issues.

8. Compliance with Standards:

Adhere to relevant industry standards and regulations for rope pulley maintenance. Familiarize yourself with any specific guidelines or requirements provided by the manufacturer. Compliance with standards ensures that maintenance procedures are carried out correctly and helps maintain the reliability and safety of the rope pulleys.

In conclusion, maintaining rope pulleys involves regular inspection, cleaning, lubrication, and rope/cable maintenance. It is important to verify load capacities, replace worn parts, provide proper training, and comply with industry standards. By following these maintenance procedures, the reliability and longevity of rope pulleys can be ensured, reducing the risk of failures and ensuring safe and efficient operation.

rope pulley

In which industries and scenarios are rope pulleys commonly employed?

Rope pulleys find extensive applications across various industries and scenarios due to their versatility, mechanical advantage, and ease of use. Here’s a detailed explanation of the industries and scenarios where rope pulleys are commonly employed:

1. Construction and Engineering:

Rope pulleys play a crucial role in the construction and engineering industry. They are commonly used for lifting and moving heavy materials, equipment, and machinery at construction sites. Rope pulleys are employed in cranes, hoists, and material handling systems, making tasks such as lifting steel beams, concrete blocks, and construction components more manageable and efficient.

2. Transportation and Shipping:

In the transportation and shipping industry, rope pulleys are utilized for various purposes. They are employed in loading and unloading cargo onto ships, securing cargo during transportation, and operating shipboard equipment such as davits and winches. Rope pulleys enable the smooth movement and control of cargo, ensuring safe and efficient shipping operations.

3. Theater and Entertainment:

Rope pulleys play a vital role in the theater and entertainment industry. They are used in stage rigging systems to lift and lower scenery, props, and lighting equipment. Rope pulleys allow for precise control and movement, enabling dynamic stage setups, scene changes, and special effects during performances.

4. Recreational Activities:

Rope pulleys are commonly employed in various recreational activities. For example, in rock climbing, pulleys are used in systems such as hauling and lowering equipment. Zip-lining and canopy tours also utilize rope pulleys for smooth movement along the zip lines. Sailing and boating activities require pulleys for adjusting sail positions and controlling rigging systems.

5. Rescue Operations:

Rope pulleys are essential tools in rescue operations, particularly in scenarios such as mountain rescues, cave explorations, and swift-water rescues. They enable the controlled lifting and lowering of rescue personnel and equipment, facilitating the safe extraction of individuals in challenging environments.

6. Agriculture and Farming:

In the agriculture and farming industry, rope pulleys are used for various applications. They can be employed in hay baling and lifting systems, facilitating the movement and storage of bales. Rope pulleys are also utilized in irrigation systems, animal husbandry equipment, and other agricultural machinery.

7. Home and DIY Projects:

Rope pulleys have practical uses in home and DIY projects. They can be employed for tasks such as lifting heavy objects, installing overhead storage systems, or creating homemade hoists for garage or workshop purposes. Rope pulleys provide a cost-effective and convenient solution for various lifting and moving needs around the house.

These examples highlight the wide range of industries and scenarios where rope pulleys are commonly employed. Their versatility, mechanical advantage, and ease of use make them invaluable tools for tasks involving lifting, lowering, or moving objects with the use of ropes or cables.

China manufacturer Luoyang Citic IC Single-Rope Mine Drum Hoister Elevator Sheave Pulley   pulley puller		China manufacturer Luoyang Citic IC Single-Rope Mine Drum Hoister Elevator Sheave Pulley   pulley puller
editor by CX